How do I setup my Music Man Axis SuperSport?

Rate this item
(7 votes)
First, check relief in the neck by holding the lowest (bass) string down on the second fret with your fretting hand, then hold it down on the 12th fret with your right thumb and tap on the string in the middle to show how straight the string is. It should be no more than the thickness of a thick business card. If there is no relief in the neck, applying a little pressure in the middle of the neck (downward) after adjusting the trussrod wheel should take care of it. If not, please contact us as it may be necessary to send the instrument in to the factory.

Factory string setting for standard tuning starts at the bass side 2/32" (1.59 mm) to 5/64" (1.98 mm) and the treble side is 3/64" (1.19 mm) to 2/32" (1.59 mm) measured from the 12th fret to the bottom of the strings. The top of the strings should have the radius of the fretboard when you are looking at the strings in the playing position and by rotating the instrument while at the same time bringing strings into view one at a time. Remember, string height is ultimately determined by your preference and playing style.

Now, you are ready to play your guitar. If a string buzzes on an open string to the 5th fret and no higher, more relief is needed. If there is more buzz from the 5th to the 12th fret, the neck needs to be straighter. You should check the string height after every adjustment. If the buzzing happens throughout the neck, the string height needs to be increased.

Experiment a little to get the exact action you want.

Last modified on Tuesday, 26 October 2010 11:56